Regularly checking and resealing your RV seams is one of the most important maintenance tasks you can do to protect your rig from costly water damage. Over time, weather, road vibrations, and UV exposure can wear down your RV’s seals—especially around windows, doors, roof edges, and slide-outs. In this guide, we’ll walk you through how to inspect and reseal your RV seams so you can travel with peace of mind all season long.
Why Checking and Sealing Your RV Seams Matters
Water damage is one of the most expensive and common problems RVers face. Moisture from leaks can lead to rot, mold, and structural issues. Preventing this starts with routine inspections and resealing wherever needed. This is especially important before and after winter, and during heavy travel months like spring and summer.
Where to Check for RV Seal Damage
Here are the common areas where sealant or caulking may wear down:
-
Roof seams and edges
-
Around vents and skylights
-
Window and door frames
-
Slide-out edges
-
Storage compartments
-
Corners of the RV body
-
Around lights, antennas, and other exterior attachments
Tip: Always inspect from top to bottom. Start with the roof and work your way down each side of the rig.
How to Inspect Your RV Seals
Step 1: Clean the Surface
Use a mild RV-safe cleaner and a soft cloth to wipe down the seams. This will make it easier to spot cracks, gaps, bubbles, or peeling sealant.
Step 2: Look for Damage
Check for:
-
Cracking or peeling sealant
-
Gaps in the seams
-
Signs of moisture or discoloration
-
Soft spots (especially on the roof)
Use a flashlight to inspect shadowed areas, and don’t forget to check underneath slide-outs or awnings.
How to Reseal Your RV Seams
What You’ll Need:
-
RV-specific sealant (such as Dicor for horizontal surfaces and Lap Sealant or ProFlex for vertical seams)
-
Caulking gun (if not using a squeeze tube)
-
Painter’s tape (optional for clean lines)
Step-by-Step Instructions:
1. Remove Old Sealant
If the existing sealant is cracked or flaking, use a plastic scraper to remove it carefully. Avoid damaging the RV surface.
2. Clean the Area Again
Wipe down the exposed surface with isopropyl alcohol or another RV-safe solvent to ensure proper adhesion.
3. Apply New Sealant
Apply a steady bead of RV sealant along the seam. Smooth it out with your finger or a caulk tool to ensure even coverage and no gaps.
4. Let It Cure
Allow the sealant to dry for the manufacturer’s recommended time—usually 24–48 hours. Avoid rain or washing your RV during this time.
How Often Should You Reseal Your RV?
A good rule of thumb is to:
-
Inspect every 90 days
-
Reseal at least once a year, or as needed based on your inspection
Regular maintenance helps avoid major repairs down the road.
Final Tips for Sealant Success
-
Always use RV-approved sealant, not general-purpose silicone.
-
Do not reseal in cold or wet weather unless the product allows it.
-
Consider hiring a professional for high or hard-to-reach areas.
-
Keep a sealant kit in your RV in case of emergency leaks while on the road.
Protect Your Investment
By staying on top of RV seam maintenance, you’re extending the life of your rig and keeping costly repairs at bay. This simple DIY task can save you thousands down the road—and keep you camping comfortably all season long.
Looking for more RV maintenance tips?
Check out our blog on Spring RV Maintenance Checklist or Must-Do RV Battery Care Before Traveling to keep your rig road-ready.
See you on the road!
Share:
Must-Do RV Battery Care Before Traveling